Tools & Hardware

ADJ COLLAR WRENCH.25" ADJUSTER COLLAR SPANNER PIN WRENCH

1/2IN SAE M 6AN M1/2IN SAE MALE TO 6AN MALEConverts 1/2" SAE male to 6AN male

1/8NPT 90DEG1/8NPT MALE TO FEMALE, 90DEGConverts 1/8NPT male to female fitting

1/8NPT PLUG1/8NPT PLUGAluminum, Low profile, Black anodized

SWAY BAR BARACKETS2010-2014 FJ CRUISER/2003-UP 4RUNNER SWAYBAR RELOCATION KITThese Aluminum Sway Bar Relocation Blocks will move your sway bar one inch forward to avoid any contact with any aftermarket shock. This small investment can save yourself a ton...

10AN FEM-FEM10AN COUPLER, FEM/FEMBlack anodized aluminum.

10AN BANJO 1JZ/2JZ10AN MALE PRESS-FIT, 1JZ/2JZ INTAKE, EXCLUDING 2JZ-GE VVT-ICNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.

10AN BANJO 2J EXH10AN MALE SWIVEL BANJO 13.5MM PRESS FITCNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.

PRESS FTNG10AN MALE PRESS-FIT, HONDA K-SERIESPress-in valve cover breather fitting. Features a 10AN male 360 degree swiveling fitting. Compatible with all K-series valve covers that have the press-in (not cast) nipple.

PRESS FTNG10AN MALE PRESS-FIT, KA24DE INTAKEPress-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.

FTNG PRES FIT10AN MALE PRESS-FIT, RB25DET INTAKE AND EXHAUSTThis fitting presses into the Nissan RB25DET valve cover and will work on either intake or exhause side. Presents a swiveling 10AN male fitting for connecting a hose to.

PRESSFIT10AN MALE PRESS-FIT, RB25DET SR20DET S14/S15 INTAKEThis stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a high flowing vent-to-atmosphere swiveling 10AN...

PRESS FTNG10AN MALE PRESS-FIT, SR20DET S13 EXHAUSTPress in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.

SWIV FITTING10AN MALE PRESS-FIT, TOYOTA 1JZ NON VVT-I EXHAUSTPress in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.

SWIV BANJO 1JZ10AN MALE PRESS-FIT, TOYOTA 1JZ VVT-I EXHAUSTPress fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.